- specification of system performance
- practical considerations
DC motors is most affected by
- copper loss
In small induction =
- energy is stored & released quickly
Process w/c is not included in monolithic IC fabrication-
- Die Casting
Change in magnetic field-
- Produces fluctuation in electric field
Reason why high range is use when voltmeter is connected in a circuit—
- to prevent excess current through meter movement
Power loss due to corona is not proportional to space---
- between conductors
Outstanding features of universal motor:
- Highest output of kW/kg ratio
What gives OP amps immunity to noise immunity to noise:
- Hysterises
JFET references point JFET –
- Source
It helps in energy conversion –
- counter emf
robotic arm w/c allows the robot to move, yaw,pitch and roll—
- manipulator
it compose of passive components such as resistor and capacitor—
- Film IC
place where the cathode in dry cell found –
- zinc container
gain of buffer amplifier—
- unity
conductivity of semicon when there is light
- increasing
fault connection—
- faulty wiring connections
all odd harmonics—
- square wave
A transistor that operates on a Non saturated switch eliminate
- Storage Time.
The time required for Ic to reach 90% of its maximum level from 10 % level is
- Rise Time.
DE MOSFET differs from JFET
- generally because It has no PN Jnunction.
CMOS circuits are extensively in on – chip computers because of its
- extremely large packing density.
Nickel Iron Battery has active elements of
- Nickel Hydroxide; powdered Iron with its oxides; 21% solution of caustic potash.
A Transformer coupled Amplifier would give
- Impedance Matching.
When an emitter bypass capacitor in a CE amplifier is removed its
- voltage gain is considerably reduced.
A circuit that uses an integrator to convert a step wave to a ramp wave form is a
- Miller Circuit.
A phototransistor is more like a conventional transistor except that in there case
- it uses light energy to switch it on.
Before illuminating a PN Junction Photo Diode
- it has to be reversed biased.
When an IC is formed by depositing the required devices of passive elements like resistors, capacitors and is interconnected on an insulated substrate
- it is a Film IC
The emitter of a transistor is generally doped the heaviest
- because it has to dissipate maximum power.
The difference between a J-K flip flop from a S-C flip flop is its
- Toggle Condition.
When a PN Junction is produced, the diffusion current would cause a
- Barrier Potential.
In the Operation enhancement only N – channel MOSFET,
- the value of its gate voltage is highly positive.
Silicon is Z = 14, its outer sub shell
- is half – filled.
OS Memory
- contains the bios that is read in when the computer is first started.
No comments:
Post a Comment